Electro Crane · Odhav, Ahmedabad · Since 2013
EOT Crane Manufacturer in India
Single and double girder EOT cranes, goliath and jib cranes, wire rope hoists and lifting equipment — designed to Indian Standards, built in Ahmedabad and load tested at 125% before they reach your plant.
Who we are
Lifting & shifting solutions, engineered in Ahmedabad
The Electrocrane Equipments — known to customers as Electro Crane — has been manufacturing and supplying cranes and crane spare parts since 2013. From our works in Odhav, Ahmedabad we design and build Electric Operated Overhead Travelling (EOT) cranes, Hand Operated (HOT) cranes, goliath and jib cranes, flame proof cranes, electric wire rope hoists and a full line of lifting equipment.
Whatever your lifting need — simple or complex — our aim is the same: the most appropriate lifting equipment and service, so that every lift adds value to your operation. As a dedicated EOT crane manufacturer in India, we keep our designs rooted in Indian Standards and our components standard, so your crane stays easy to maintain for its whole working life.
◆ Electro Crane at a glance ◆
- Established
- 2013
- Works
- Odhav, Ahmedabad
- Business
- Manufacturer & supplier
- Shipment
- Road · Sea · Air
Product range
Cranes & lifting equipment we manufacture
Every product below is designed and built by Electro Crane. Open any page for specifications, options, applications and FAQs.

Industrial EOT Crane
Electrically operated overhead travelling cranes from 500 kg to 50 t, built to IS 3177.

Single Girder EOT Crane
Economical overhead crane with one main girder and an underhung wire rope hoist.

Double Girder EOT Crane
Two box girders and a top-running crab for heavy loads, long spans and maximum lift.

Goliath Gantry Cranes
Gantry cranes on ground-level rails for yards, sheds and open areas.
Underslung EOT Crane
Under-running crane suspended from the roof — no runway columns, maximum coverage.

Jib Crane
Pillar or wall jib cranes, 250 kg to 5 t, 180° / 270° / 360° swivel.

Electric Wire Rope Hoist
IS 3938 wire rope hoists, 500 kg to 20 t, helical gearing and crane-duty motors.

Flame Proof Crane
FLP overhead cranes for Zone 1 & 2 hazardous areas, gas groups IIA, IIB, IIC.
Capacity map
From a 250 kg jib to a 50 t double girder crane
Use this map to see where each product line sits. Cranes, hoists and lifts share the same engineering approach, so you can standardise on one supplier for the whole plant.
- Spans up to 30 m on EOT cranes, 20 m on goliath cranes
- Height of lift and speeds designed to your application
- Pendant, radio remote or cabin control
- Flame proof versions for Zone 1 and Zone 2
Safe working load, logarithmic scale. Ranges as published by Electro Crane; special designs on request.
Why Electro Crane
Built to lift. Built to last.
Reliable, efficient and durable equipment, a clear and ethical business policy, competitive pricing and on-time delivery — that is what has kept customers coming back.
Built to Indian Standards
IS 3177, IS 4137, IS 807 and IS 800 for cranes; IS 3938 for hoists; IS 3832 for chain blocks.
125% load tested
Every crane is load tested to 125% of rated capacity in our own workshop and certified.
Standard components
Reliable crane-duty motors, brakes and controls — easy to maintain and source spares for.
Engineered to your duty
Duty classes M5 to M8 matched to your actual lifting, not just the tonnage.
Custom & special cranes
Mix of standard and specially designed components for unusual loads and buildings.
Lifetime support
Operator training, site service, crane repair and spare parts from Ahmedabad.
Industries
Cranes engineered for your industry
Steel mills need M8 duty; chemical plants need flame proof electricals; machine shops need precise inching. We design for the job.
Steel MillsCoils, billets and roll changes
FoundryMoulds, castings and ladle areas
Cement PlantsKiln, mill and maintenance bays
Chemical ProcessingVessels, drums and hazardous zones
Paper MillsReels, rolls and machine halls
Plastic ProcessingMoulds, dies and extruder parts
Fabrication WorkshopsPlates, sections and weldments
Machining WorkshopsJobs on and off CNC machinesChoosing a crane
Single girder or double girder?
It is the first decision in most EOT crane projects. Single girder cranes are lighter and more economical; double girder cranes lift more, span further and give the best hook height.
Read the full comparison| Single girder | Double girder | |
|---|---|---|
| Typical sweet spot | Up to ~15 t, ~20 m span | Up to 50 t, 30 m span |
| Hook height | Some lift lost under girder | Hook rises between girders |
| Building load | Light | Heavier |
| Cost | Lower | Higher, best value at high duty |
How we work
From enquiry to a working crane
Share requirement
Capacity, span, lift, duty, power supply and building details.
Engineering offer
We select the configuration and send a technical offer with quotation.
Manufacture & test
Built in our Ahmedabad works and load tested to 125% before dispatch.
Install & support
Commissioning, operator training, service visits and spare parts.
EOT crane manufacturer – FAQs
What capacity EOT cranes does Electro Crane manufacture?
Our EOT cranes cover safe working loads from 500 kg to 50,000 kg with spans up to 30 m, in single girder and double girder designs, duty class M5 to M8 as per IS 3177 / IS 807.
Where is your factory located?
Our works are at Plot No. 51, Grand Vishala Estate, Sardar Patel Ring Road Circle, Odhav, Ahmedabad-382415, Gujarat, India.
Which standards do your cranes follow?
EOT cranes are designed and manufactured in accordance with IS 3177 and IS 4137, with structures to IS 807 and IS 800. Wire rope hoists are built generally to IS 3938 and chain pulley blocks to IS 3832.
Are cranes tested before dispatch?
Yes. Cranes are load tested to 125% of rated capacity and certified from tests undertaken in our own workshop.
Do you supply cranes outside Gujarat and export?
Yes. Electro Crane supplies across India and exports; shipment can be arranged by road, sea or air.
Do you provide installation and after-sales service?
Yes. We provide operator training, site service visits, crane repair and spare parts support.
Guides
Crane buying guides

Single Girder vs Double Girder EOT Crane
Capacity, span, hook height, cost and building loads compared — a practical way to choose.

Types of Overhead Cranes
Top-running, underslung, gantry, jib and flame proof — what each crane type is for.

Overhead Crane Parts and Functions
Bridge, end carriages, hoist, hook block, runway and controls — what each part does.

EOT Crane Buying Guide
Capacity, span, lift, duty, speeds, control, power and building data — get comparable quotes.